fbpx
Last Updates: 15/02/2021

Gems Water Leak Detection Sensors

From: $371

Part Number: Water Leak Detection Sensors Category:

Email Us: sales@mycelectric.com
WhatsApp: +6016-933 1533 (Sales Enquiries)
WhatsApp: +6016-551 9084 (Technical Support)

  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: Spring Loaded
$388
  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: SPST (20 VA)
$540

Lead Time: 6 to 8 weeks

  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: SPST (20 VA)
$611
  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: SPST (20 VA)
$709
  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: Conductivity Probe
$371
  • Stem Material: N/A 
  • Float Material: N/A
  • Mounting Size: N/A
  • Switch Type: SPST (20 VA)
$1,052

DLP_1XL

DLP-1 & DLP-2
Designed to detect the presence of liquid in sumps, attached access pipes, annular spaces, or locations requiring a small float-operated sensor. Two models to fit 1-1/2″ and 2″ standard piping.

DWP_1XL

DWP-25
Designed for use in the annular space of double-wall fiberglass tanks to detect the presence of conductive liquid. When combined with Warrick® DMS or TA alarm panel, DWP-25 sensors can detect the presence of water or other conductive liquids in normally dry annular spaces.

DFP_1

DFP-25
Designed for use in the annular space of double-wall fiberglass tanks to detect hydrocarbon liquids. When hydrocarbons are present, a hydrocarbon wax pellet dissolves and closes a springloaded switch to signal a leak. This sensor is not reusable after exposure to hydrocarbons.

SVP_1

SVP-2
Designed to monitor hydrocarbon vapors in wells or sumps by absorbing the vapors and triggering a switch. Should not be used where vapors are continuously present. Fits in standard 2″ pipe with cover.

DSP-2
Utilizes conductivity probes and a reed switch-based float switch to detect the presence of liquid and differentiate between hydrocarbons and water. When combined with Warrick® DMS or TA two-channel alarm panel, the DSP-2 can discriminate between water and hydrocarbon liquids causing fault conditions.

 

Applications:

  • Above Ground Storage tanks
  • Underground Storage tanks
  • Sumps
  • Dry Annular spaces
Scroll to Top
×