Series TFP-LI Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.
Dwyer Series TFP-LI Liquid Turbine Flow Meter
Service : Clean liquids compatible with wetted materials.
Wetted Materials : PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy : ±1% of full scale.
Linearity : ±1% of full scale.
Repeatability : ±0.2% of full scale.
Temperature Limits : 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.
Pressure Limits : 100 psig (6.8 bar).
Process Connection : Compression fitting, see Catalog page.
Power Requirements : 11.5 to 15 VDC.
Power Consumption : 35 mA @ 12 VDC.
Output Signal : 0 to 5 VDC: Minimum 2.5 kΩ load.
Electrical Connections : Four-pin power and signal connector. A power adapter or mating cable required for operation. See Accessories page.
Display : LCD, 0.39″ (10 mm) digits (only in LPM).
Enclosure Rating : IP10 (NEMA 1).
Weight : 0.27 lb (121 g).
Agency Approvals : CE.
Related products
Vögtlin Instruments GCR Red-y Compact Mass Flow Regulator
Battery Powered Mass Flow Regulator, Best Variable Area Flow Meter replacement
Vogtlin Instruments GSC Red-y Smart Mass Flow Controller
High Accuracy, Low Leak Rate Mass Flow Controller with Profibus, Profinet RT and EtherCAT interfaces
Vögtlin Instruments GIM Red-y Industrial Mass Flow Meter
Explosion Proof Digital Mass Flow Meter
