The Dwyer Series 636 Pressure Transmitter is a low cost, fixed range, stainless steel transmitter with ±0.30% accuracy. It is designed to continuously measure pressure for years in even the toughest environmental and media conditions. Transmitters are explosion-proof, (FM approved) and meet NACE standards for off-shore applications.
Product Applications
Service : Liquid, gas or vapor.
Wetted Materials : 316 L SS.
Fill Fluid : DC 200 Silicone (standard).
Accuracy : ±0.30% of calibrated span.
Stability : ±0.5% of upper range limit for six months.
Temperature Limits : Electronics (ambient): -40 to 140°F (-40 to 60°C); Process interface: -40 to 212°F (-40 to 100°C).
Pressure Limits : 300% upper range limit.
Compensated Temperature Range : -20 to 180°F (-29 to 82°C).
Thermal Effect (includes zero and span): Between -20 and 180°F (-29 and 82°C). ±2.0% per 50°F (28°C).
Power Requirements : 12 to 30 VDC (636), 8 to 14 VDC (636LP), reverse polarity protection.
Output Signal : 4 to 20 mA DC, limited to 30 mA DC (636), 1 to 5 VDC (636LP).
Zero and Span Adjustments : Null: 4.0 mA ±2% span (636), 1 VDC ±1% span (636LP); Span: 16.0 mA ±1% span (636), 4 VDC ±1% span (636LP).
Loop Resistance :9 00 Ω max. @ 30 V.
Electrical Connection : 3/4″ female NPT 24″ (61 cm), 22 AWG.
Process Connection : 1/2″ female NPT.
Enclosure Rating : NEMA 4 (IP56).
Weight : 0.83 lb (374 g).
Agency Approvals : CSA, FM. FM and CSA approved explosion-proof for Class I, Division 1, Groups B, C, & D, Class II, Groups E, F, & G, Class III.
Manuals: 636 Manual
Catalog Pages: Series 636 Catalog Page
High performance pressure sensor for barometric, absolute and gauge pressure measurements
Die-cast aluminium enclosure Pressure Transducer
High performance 0.14% FS accuracy low pressure transducer
