MS3700 Series
Showing 25–48 of 74 results
MTT MS3705 Slim Plug-In Alarm Setter with Isolated Dual Output
Compares the levels of DC current or voltage signals with two set-points (upper and lower limits) and outputs two independent isolated relay contact closure signals.
MTT MS3721 Slim Plug-In PT Transmitter (RMS Calculation)
Calculates the RMS values of AC current signals from a PT and converts them into commonly used DC signals.
MTT MS3724HV Slim Plug-In High-Level Signal Conditioner (High Voltage Output Model)
Converts DC current or voltage signals into commonly used DC signals. This model features a maximum output voltage of 40V.
MTT MS3704IS Slim Plug-In High-Level Signal Conditioner
Converts 1 to 5V or 4 to 20mA DC signals into isolated 1 to 5V or 4 to 20mA DC signals.
MTT MS3768 Slim Plug-In Programmable Linearizer
Accepts non-linear DC current or voltage input and provides linearized output. Up to 21 breakpoints can be configured for segment approximation. These breakpoints and I/O ranges can be changed using a PC.
MTT MS3771 Slim Plug-In Programmable Thermocouple Temperature Transmitter
Converts thermocouple inputs into commonly used DC signals. PC programmable for I/O configuration.
MTT MS3729 Slim Plug-In Analog/Frequency Converter
Converts DC current or voltage signals into pulse train signals.
MTT MS3781 Slim Plug-In Accumulator
Accumulator that converts DC current or voltage signals into pulse train signals.
MTT MS3782 Slim Plug-In PWM Converter
Converts DC current or voltage signals into PWM signals.
MTT MS3714 Slim Plug-In Limiter
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits.
MTT MS3749 Slim Plug-In High-Frequency Pulse Shaper (Pulse Isolator)
Slim, plug-in high frequency pulse shaper that accepts pulse train signals from sensors or other devices and shapes these pulses or converts signal levels, and provides isolated single or dual output.
MTT MS3720-01 Slim Plug-In Fast Response CT Transmitter
Calculates the RMS values of AC current signals from a CT and converts them into commonly used DC signals. This model features a fast response time of 20ms or less (0 to 90%).
MTT MS3738 Slim Plug-In Manual Setter
Allows users to set a desired output value with the front-accessible switches.
MTT MS3702B Slim Plug-In RTD Temperature Transmitter
Converts RTD inputs into commonly used DC signals. This model is intended for measurement of narrow temperature spans (e.g. Pt100Ω input span of 30 to 50°C)
MTT MS3707H Slim Plug-In HART Isolator
Signal Isolator with bidirectional HART communication signals.
MTT MS3765 Slim Plug-In Arithmetic Operation Unit
Receives two DC current or voltage signals and outputs a signal proportional to the result of an arithmetic operation (addition, subtraction, multiplication or division).
MTT MS3744 Slim Plug-In High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model features a fast response time of 80μsec (0 to 90%).
MTT MS3704-S Slim Plug-In High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model operates with 24V AC power supply.
MTT MS3720C Slim Plug-In CT Transmitter
Calculates the RMS values of AC current signals from a clamp-type CT and converts them into commonly used DC signals.
MTT MS3769 Slim Plug-In Absolute Value Signal Conditioner
Converts DC current or voltage signals with polarity into absolute value signals.
MTT MS3770 Slim Plug-In Split-Range Transmitter
Amplifies DC current or voltage input signals, converts them into split range control signals, and provides isolated dual output. Available in two output variants: V-shaped and parallel characteristics.
MTT MS3700DV Slim Plug-In Voltage Divider
Converts high DC voltage signals into DC voltage signals
MTT MS3725 Slim Plug-In High/Low Signal Selector
Selects the higher or lower of two input signals and converts it into commonly used DC signals.
MTT MS3763 Slim Plug-In RTD Differential Temperature Transmitter
Detects a temperature difference between two 2-wire RTD’s and converts it into commonly used DC signals.
