MTT Instruments
Celectric has been a Distributor of MTT in Malaysia since 2018, we supply MTT with technical support.
MTT manufacturing Isolated Signal Conditioners as key products since its founding in 1975.
MTT has developed various products to meet varied customer requirements flexibly based on smaller and lower-cost concepts.
With unique analog signal processing technology and high quality and reliability, we have achieved substantial growth and an increasing share of the market for a variety of plants such as steel, power, and petrochemical plants and automobile test equipment.
Showing 73–96 of 105 results, including child brands
MTT MS3744 Slim Plug-In High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model features a fast response time of 80μsec (0 to 90%).
MTT MS3759 Slim Plug-In Pulse to Relay Contact Converter
Converts pulse train signals into relay contact (form A or C contact) signals.
MTT MS3704IS Slim Plug-In High-Level Signal Conditioner
Converts 1 to 5V or 4 to 20mA DC signals into isolated 1 to 5V or 4 to 20mA DC signals.
MTT MS3725 Slim Plug-In High/Low Signal Selector
Selects the higher or lower of two input signals and converts it into commonly used DC signals.
MTT MS3710-02 Slim Plug-In Potentiometer Transmitter (Constant Current Model)
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals. This model features providing constant current to the sensor.
MTT MS3716 Slim Plug-In First-Order Delay Signal Conditioner
Adds the first-order delay to DC current or voltage signals and converts them into commonly used DC signals.
MTT MS3763 Slim Plug-In RTD Differential Temperature Transmitter
Detects a temperature difference between two 2-wire RTD’s and converts it into commonly used DC signals.
MTT MS3708 Slim Plug-In Frequency to Analog Converter
Converts pulse train signals from flow sensors and the like into commonly used DC signals.
MTT MS3110 Terminal Block Type Potentiometer Transmitter
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.
MTT MS3010 Terminal Block Type Potentiometer Transmitter
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.
MTT MS3781 Slim Plug-In Accumulator
Accumulator that converts DC current or voltage signals into pulse train signals.
MTT MS3704W Slim Plug-In High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model features separate adjustment of Output 1 and Output 2.
MTT MS3021 Terminal Block Type PT Transmitter (RMS Calculation)
Calculates the RMS values of AC current signals from a PT and converts them into commonly used DC signals.
MTT MS3739IB Slim Plug-In Ratio/Bias Converter]
Converts the ratio and bias of DC current or voltage signals. Y = K(X+B) (positive gain), Y = K(X+B) + F (negative gain)
MTT MS3720-01 Slim Plug-In Fast Response CT Transmitter
Calculates the RMS values of AC current signals from a CT and converts them into commonly used DC signals. This model features a fast response time of 20ms or less (0 to 90%).
MTT MS3702B Slim Plug-In RTD Temperature Transmitter
Converts RTD inputs into commonly used DC signals. This model is intended for measurement of narrow temperature spans (e.g. Pt100Ω input span of 30 to 50°C)
MTT MS3707G Slim Plug-In Distributor for Level Gauges
A wide span adjustment range allows the module to be used for level gauges with different ranges.
MTT MS3104 Terminal Block Type High-Level Signal Conditioner (Isolator)
Converts DC current or voltage signals into commonly used DC signals.
MTT MS3910 Chassis-mounting Potentiometer Transmitter
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.
MTT RC3900 Signal Conditioner Mounting Chassis
Chassis for the MS3900 series signal conditioners
MTT MS3762 Slim Plug-In Subtractor
Receives two DC current or voltage signals and outputs a signal proportional to the difference of those signals.
MTT MS3008 Terminal Block Type Frequency/Analog Converter
Converts pulse train signals from flow sensors and the like into commonly used DC signals.
MTT MS3737 Slim Plug-In Distributor (Non-Isolation between Input and Output)
Powers a two-wire transmitter and converts its 4 to 20mA signals into 1 to 5V or 4 to 20mA. No isolation between input and output.
MTT MS3767 Slim Plug-In Temperature/Pressure Compensator
Compensates for variations in temperature, pressure, or differential pressure for accurate flow calculation.
