- Inline version: nominal diameter DN 15 to 100 (1/2 to 4″)
- Process pressure up to PN 40, Class 300
- High accuracy: ±1.5 % o.r. (10 to 100 % o.f.s.)
- Device as compact or remote version
- 4-20 mA HART, PROFIBUS PA/DP, Modbus RS485, FF
- Worldwide approvals (Hazardous areas)
Last Updates: 15/02/2021
T-mass
Diameter | DN 15 to 100 (1/2″ to 4″) |
Wetted Materials | Transducer: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022) Process connections: 1.4404 (316L/316) Sensor body: DN 15 to 25 (1/2″” to 1″”): CF3M-A351 DN 40 to 100 (1-1/2″” to 4″”): 1.4404 (316/316L) Bushing: PEEK GF30, PVDF O-ring seals: EPDM, Kalrez 6375, Viton FKM |
Accuracy | Gas: 1.5% o.r. (10 to 100% o.f.s.), 0.15% o.f.s. (1 to 10% o.f.s.) |
Maximum Process Pressure | PN40 / Cl. 300 / 20K |
Degree of Protection | IP 67 NEMA 4x |
Display | Liquid crystal: back-lit, two lines with 16 characters per line |
Outputs | 4-20mA HART (active/passive selectable), pulse, frequency, status HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485 |
Inputs | 4-20mA, status input |
Power Supply | 85 to 260 VAC, 45 to 65 Hz 20 to 55 VAC, 45 to 65 Hz 16 to 62 VDC |
The Endress & Hauser t-mass 65F inline device is specially designed for the direct mass flow measurement of industrial gases and compressed air. With a turndown of typically 100:1 it can measure accurately operational flow rates and off line leakage. The integrated gas engine allows the customer to configure the device for 20 freely selectable gases.
Datasheet: Proline t-mass 65F, 65I