Endress+Hauser Proline Prosonic Flow 92F Ultrasonic flowmeter

● Safe design for process industries – international hazardous area approvals
● No additional pressure loss – full bore design
● Process transparency – diagnostic capability
● Easy installation and reduced installation costs – loop-powered transmitter
● Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI
● Automatic recovery of data for servicing

● The measuring principle is independent of pressure, density, temperature, conductivity and viscosity
● Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

Device properties
● Full compliance according to NACE MR0175 and MR0103
● Nominal diameter: DN 25 to 300 (1 to 12″)
● Medium temperature: –40 to 200 °C (–40 to 392 °F)
● Device in compact or remote version
● 2-line backlit display with push buttons
● HART, PROFIBUS PA, FOUNDATION Fieldbus

• Measuring principle

  Ultrasonic flow

• Product headline

  The higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs. Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

• Sensor features

  Safe design for process industries – international hazardous area approvals. No additional pressure loss – full bore design. Process transparency – diagnostic capability. Full compliance according to NACE MR0175 and MR0103. Nominal diameter: DN 25 to 300 (1 to 12″).

• Transmitter features

  Easy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI. Automatic recovery of data for servicing. Device in compact or remote version. 2-line backlit display with push buttons.

• Nominal diameter range

  2 path version: DN80 to 300 (3 to12″)
  3 path version: DN25 to 50 (1 to 2″)
  4 path version: DN 80 to 300 (3 to 12″)

• Wetted materials

  Sensor: 
  A351-CF3M (DN25 to 100) 
  1.4404/TP316/TP316L or A106 GrB (DN150 to 300) 
  Transducer: 1.4404/316/316L
  Flanges : 1.4404/316/316L or A105/1.0432

• Measured variables

  Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength

• Max. measurement error

  Volume flow (standard): 
  – ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
  Volume flow (option): 
  – ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

• Measuring range

  0.5 to 10 m/s (1.6 to 33 ft/s)

• Max. process pressure

  PN 40 / ASME Cl. 300 / JIS 20K

• Medium temperature range

  -40 to +150 °C (-40 to +302 °F)
  -40 to +200 °C (-40 to +392 °F) optional

• Ambient temperature range

  -40 to +60 °C (-40 to +140 °F) compact
  -40 to +80 °C (-40 to +176 °F) remote sensor
  -40 to +60 °C (-40 to +140 °F) remote transmitter

• Transmitter housing material

  AlSi10Mg, coated

• Degree of protection

  IP67, type 4X enclosure
  IP68 type 6P enclosure (option for remote)

• Display/Operation

  2 lines backlit display with 3 push buttons

• Outputs

  1x 4-20 mA HART 
  1x Pulse/frequency/switch output (passive)

• Inputs

  N/A

• Digital communication

  HART, Profibus PA, FOUNDATION Fieldbus

• Power supply

  2 wire loop powered

• Hazardous area approvals

  ATEX,FM, CSA, TIIS

• Other approvals and certificates

  3.1 material (wetted parts), calibration performed on accredited
  calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000
  PED, EAC marking

• Product safety

  EAC marking

• Metrological approvals and certificates

  calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

• Pressure approvals and certificates

  CRN, PED, AD2000

• Material certificates

  3.1 material (wetted parts)

Datasheet: Proline Prosonic Flow 92F Technical Information (SI units)