Endress+Hauser Proline Promass S 500 Coriolis flowmeter

● Increased process safety – easily cleanable and fully self-drainable tube design
● Fewer process measuring points – multivariable measurement (flow, density, temperature)
● Space-saving installation – no in/outlet run needs
● Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses
● Reduced complexity and variety – freely configurable I/O functionality
● Integrated verification – Heartbeat Technology

● Measuring principle operates independently of physical fluid properties such as viscosity or density
● Dedicated to applications requiring optimal cleanability under hygienic conditions.

Device properties
● Large range of hygienic process connections
● 3-A and EHEDG conform
● Fast recovery from CIP/SIP
● Remote version with up to 4 I/Os; hygienic sensor connection housing with IP69
● Backlit display with touch control and WLAN access
● Standard cable between sensor and transmitter

• Measuring principle

  Coriolis

• Product headline

  Easy-to-clean flowmeter with self-drainable single-tube system, as remote version with up to 4 I/Os. Dedicated to applications requiring optimal cleanability under hygienic conditions.

• Sensor features

  Increased process safety – easily cleanable and fully self-drainable tube design. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Large range of hygienic process connections. 3-A and EHEDG conform.

• Transmitter features

  Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os; hygienic sensor connection housing with IP69. Backlit display with touch control and WLAN access.

• Nominal diameter range

  DN 8 to 50 (⅜ to 2″)

• Wetted materials

  Measuring tube: 1.4435 (316L) 
  Connection: 1.4435 (316L); 1.4404 (316/316L)

• Measured variables

  Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

• Max. measurement error

  Mass flow (liquid): ±0.10 % 
  Volume flow (liquid): ±0.10 % 
  Mass flow (gas): ±0.50 % 
  Density (liquid): ±0.0005 g/cm³

• Measuring range

  0 to 70 000 kg/h (0 to 2570 lb/min)

• Max. process pressure

  PN 40, Class 150, 20K

• Medium temperature range

  –50 to +150 °C (–58 to +302 °F)

• Ambient temperature range

  Standard: –40 to +60 °C (–40 to +140 °F) 
  Option: –50 to +60 °C (–58 to +140 °F)

• Sensor housing material

  1.4301 (304), corrosion resistant
  Sensor connection housing (standard): AlSi10Mg, coated
  Sensor connection housing (option): 1.4301 (304); 1.4404 (316L)

• Transmitter housing material

  AlSi10Mg, coated; Polycarbonat

• Degree of protection

  Sensor remote version (standard): IP66/67, type 4X enclosure 
  Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure

• Display/Operation

  4-line backlit display with touch control (operation from outside) 
  Configuration via local display and operating tools possible

• Outputs

  4 outputs: 
  4-20 mA HART (active/passive) 
  4-20 mA WirelessHART 
  4-20 mA (active/passive) 
  Pulse/frequency/switch output (active/passive) 
  Double pulse output (active/passive) 
  Relay output

• Inputs

  Status input 
  4-20 mA input

• Digital communication

  HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA

• Power supply

  DC 24 V 
  AC 100 to 230 V 
  AC 100 to 230 V / DC 24 V (non-hazardous area)

• Hazardous area approvals

  ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC

• Product safety

  CE, C-tick, EAC marking

• Functional safety

  Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

• Metrological approvals and certificates

  Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) 
  Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)

• Pressure approvals and certificates

  PED, CRN

• Material certificates

  3.1 material

• Hygienic approvals and certificates

  3-A, EHEDG, cGMP

Datasheet: Proline Promass S 500 Technical Information