Endress+Hauser Proline Promass 80P Coriolis flowmeter

● Highest process quality – fully compliant to industry requirements
● Fewer process measuring points – multivariable measurement (flow, density, temperature)
● Space-saving installation – no in/outlet run needs
● Cost-effective – dedicated design for standard applications
● Safe operation – display provides easy readable process information
● Fully industry compliant – IEC/EN/NAMUR

● Measuring principle operates independently of physical fluid properties such as viscosity or density
● Dedicated for applications under sterile conditions in the life sciences industry.

Device properties
● Straight, easy cleanable single-tube system
●Electropolished measuring tube in 1.4435 (316L)
● Fast recovery from CIP/SIP
● 2-line backlit display with push buttons
● Device in compact or remote version
● HART, PROFIBUS PA

• Measuring principle

  Coriolis

• Product headline

  The specialist for life sciences with a compact or remote transmitter. Dedicated for applications under sterile conditions in the life sciences industry.

• Sensor features

  Highest process quality – fully compliant to industry requirements. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. ASME BPE, 3-A and EHEDG conform & low delta ferrite. Electropolished measuring tube in 1.4435 (316L).

• Transmitter features

  Cost‐effective – dedicated design for standard applications. Safe operation – display provides easy readable process information. Fully industry compliant – IEC/EN/NAMUR. 2‐line backlit display with push buttons. Device in compact or remote version.

• Nominal diameter range

  DN 8 to 50 (⅜ to 2″)

• Wetted materials

  Measuring tube: 1.4435 (316L)
  Connection: 1.4435 (316L); 1.4404 (316/316L)

• Measured variables

  Mass flow, density, temperature, volume flow, corrected volume flow, reference density

• Max. measurement error

  Mass flow (liquid): ±0.15 %
  Volume flow (liquid): ±0.15 %
  Mass flow (gas): ±0.5 %
  Density (liquid): ±0.0005 g/cm³

• Measuring range

  0 to 70 000 kg/h (0 to 2570 lb/min)

• Max. process pressure

  PN 63, Class 300, 40K

• Medium temperature range

  –50 to +200 °C (–58 to +392 °F)

• Ambient temperature range

  Standard: –20 to +60 °C (–4 to +140 °F)
  Option: –40 to +60 °C (–40 to +140 °F)

• Sensor housing material

  1.4301 (304), corrosion resistant

• Transmitter housing material

  Powder‐coated die‐cast aluminium
  1.4301 (304), sheet
  CF3M (316L), cast

• Degree of protection

  IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure

• Display/Operation

  2‐line backlit display with push buttons
  Configuration via local display and operating tools possible

• Outputs

  3 outputs:
  0‐20 mA (active)/4‐20 mA (active/passive)
  Pulse/frequency/switch output (passive)

• Inputs

  Status input

• Digital communication

  HART
  PROFIBUS PA

• Power supply

  DC 16 to 62 V
  AC 85 to 260 V (45 to 65 Hz)
  AC 20 to 55 V (45 to 65 Hz)

• Hazardous area approvals

  ATEX, IECEx, FM, CSA, NEPSI, TIIS

• Other approvals and certificates

  3.1 material, calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL
  PED, CRN
  3-A, FDA, ASME BPE, ISPE

• Product safety

  CE, C-tick, EAC marking

• Functional safety

  Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

• Metrological approvals and certificates

  Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR

• Pressure approvals and certificates

  PED, CRN

• Material certificates

  3.1 material

• Hygienic approvals and certificates

  3-A, FDA, ASME BPE, ISPE

Datasheet: Proline Promass 80P, 83P Technical Information

Proline Promass 80I, 83I Technical Information