Promag D, available as wafer version, is designed for all applications where space is at a minimum. It is the preferred choice for basic applications in the water industry. Combined with the highly cost-effective Promag 10 transmitter, Promag 10D is the ideal solution for measurement of liquids for various applications and available in a compact or remote version.
● Easy, fast centering of the sensor – innovative housing construction
● Energy-saving flow measurement – no pressure loss due to cross-section constriction
● Cost-effective – designed for easy applications and direct integration
● Safe operation – display provides easy readable process information
● Fully industry compliant – IEC/EN/NAMUR
● Maintenance-free – no moving parts
● The measuring principle is virtually independent of pressure, density, temperature and viscosity
● For basic water applications; optimized for limited space and plastic pipe installations.
Device properties
● Short installation length and low weight
● Integrated ground disks made of stainless steel
● International drinking water approvals
● 2‐line display with push buttons
● Device in compact or remote version
● HART
Product headline
The highly cost‐effective flowmeter, available as compact wafer. For
basic water applications; optimized for limited space and plastic pipe
installations.Sensor features
Easy, fast centering of the sensor – innovative housing construction. Energy‐saving flow measurement – no pressure loss due to cross‐section constriction. Maintenance‐free – no moving parts. Short installation length and low weight. Integrated ground disks made of stainless steel.
Transmitter features
Cost‐effective – designed for easy applications and direct integration. Safe operation – display provides easy readable process information. Fully industry compliant – IEC/EN/NAMUR. 2‐line display with push buttons. Device in compact or remote version.
Nominal diameter range
DN 25 to 100 (1 to 4″)
Wetted materials
Liner: Polyamide
Electrodes: 1.4435 (316L)Measured variables
Volume flow
Max. measurement error
Volume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s)
Measuring range
9 to 4700 dm3/min (2.5 to 1250 gal/min)
Max. process pressure
PN 16, Class 150, 10K
Medium temperature range
0 to +60 °C (+32 to +140 °F)
Ambient temperature range
–20 to +60 °C (–4 to +140 °F)
Sensor housing material
AlSi10Mg, coated
Sensor connection housing: AlSi10Mg, coatedTransmitter housing material
Powder‐coated die‐cast aluminum
Degree of protection
Compact version: IP66&67, type 4X enclosure
Sensor remote version: IP66/67, type 4X enclosure
Transmitter remote version: IP 67, type 4X enclosureDisplay/Operation
2‐line display with push buttons
Configuration via local display and operating tools possibleOutputs
4‐20 mA HART (active)
Pulse/switch output (passive)Inputs
None
Digital communication
HART
Power supply
DC 11 to 40 V
AC 85 to 250 V (45 to 65 Hz)
AC 20 to 28 V (45 to 65 Hz)Hazardous area approvals
FM
CSAProduct safety
CE, C-tick, EAC marking
Metrological approvals and certificates
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Hygienic approvals and certificates
Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920
