The FTW360 is made for detection of liquids on the suction side of a pump for dry run protection. It operates in all conductive liquids, sludges and pastes that do not form an insulated build-up on the wall of the piping (e.g. oil film). The unit is also suitable for minimum or maximum detection in tanks.
Last Updates: 15/02/2021
- Simple and reliable solution also for adhesive or viscous products
- Cost-effective probe for conductive liquids
- Universal electronics for AC and DC voltages
For detection of liquids on the suction side of a pump for dry run protection. For conductive liquids, sludges and pastes that do not form an insulated build-up on the wall of the piping (e.g. oil film). For minimum or maximum detection in tanks.
- Process connection: Thread
- Sensor length: Flush-mounted
- Temperature: -20 to +100°C (-4 to +212°F), CIP to 130°C, for ½ h
- Pressure: -1 to 10bar (-14.5 to 145psi)
Characteristic / Application
Compact limit switch for pump protection,
Active build-up compensation,
Flush mountingSpecialities
CIP suiteable
Supply / Communication
21V … 253V AC
20V … 200V DCAmbient temperature
-20 °C … 60 °C
(-4 °F … 140 °F)Process temperature
-20 °C … 100 °C
(-4 °F … 212 °F)Process pressure absolute / max. overpressure limit
Vacuum … 10 bar
(Vacuum … 145 psi)Min. conductivity of medium
10 µS/cm
Main wetted parts
1.4571, PTFE
Process connection
G3/4
Communication
Relay
Application limits
Observe minimum medium conductivity