fbpx
Last Updates: 16/08/2020

E&H Prosonic FDU91F Ultrasonic measurement Time-of-Flight

Part Number: FDU91F Categories: ,
  • Email Us: sales@celectric.com.my
  • WhatsApp Us: +60165519084
  • The FDU91F ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. Also for flow measurement in open channels and at weirs. Measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Fully welded 316L with hygienic process connection available. Maximum measuring range in liquids 10m (33ft), solids 5m (16ft).

    • Integrated temperature sensor for Time-of-Flight correction. Accurate measurements are possible, even if temperature changes are present
    • Hermetically welded sensors (316L, 1.4404, 1.4435) for highest chemical resistance
    • Suited for rough ambient conditions thanks to separate installation from the transmitter 
      (up to 300m)
    • Reduced build-up formation because of the self-cleaning effect
    • Integrated automatic sensor detection for transmitters FMU90/FMU95 for simple commissioning
    • Weather resistant and flood-proof (IP 68)
    • Hygienic process connections available

    Continuous, non-contact level measurement of fluids and bulk materials in silos, on belts, stockpiles or in crushers. Also for flow measurement in open channels and at weirs. Used in measurements in low structural heights.

    • Process connections: Thread, Tri-Clamp
    • Temperature: -40 to +105°C (-40 to +221°F)
    • Pressure: 0.7 to 4bar (10 to 58psi)
    • Max. measuring range: Liquids 10m (33ft), solids 5m (16ft)
    • Blocking distance: 0.3m (1ft)
    • International explosion protection certificates, hygienic certificates
    • Measuring principle

      Ultrasonic

    • Characteristic / Application

      Separated version with field housing or top hat rail housing for control cabinet instrumentation, 300m in-between sensor and transmitter

    • Supply / Communication

      4-wire (HART, Profibus DP)

    • Accuracy

      +/- 2mm + 0.17% of measured distance

    • Ambient temperature

      -40 °C … 105 °C
      (-40 °F … 221 °F)

    • Process temperature

      -40 °C … 105 °C 
      (-40 °F … 221 °F)
      30 min: 135 °C / 275 °F)

    • Process pressure absolute / max. overpressure limit

      0.7 bar … 4 bar abs
      (10 psi … 58 psi)

    • Main wetted parts

      316L (fully welded IP68 / NEMA 6P)

    • Process connection

      G / NPT 1″, DN80 / 100, ASME 3″ / 4″

    • Process connection hygienic

      Tri-Clamp ISO2852, DN80 (3 1/2″), DN100 (4″)

    • Blocking distance

      0.3 m (1 ft)

    • Max. measurement distance

      5 m (16 ft)

    • Communication

      Transmitter:
      4 … 20 mA HART
      Profibus DP

    • Certificates / Approvals

      ATEX, FM, CSA, IEC Ex, INMETRO, NEPSI

    • Design approvals

      EN 10204-3.1

    • Options

      Second 4…20 mA output

    • Components

      Transmitter:
      FMU90

    Datasheet: Alignment Unit FAU40 Technical Information

    Prosonic S FDU90,91,91F,92,93,95 Technical Information,Operating Instructions

    Scroll to Top
    ×