fbpx
Last Updates: 19/09/2020

E&H Proline t-mass 65I Thermal mass flowmeter

Part Number: Proline t-mass 65I Categories: ,

Email Us: sales@celectric.com.my
WhatsApp Us: +60165519084

  • Insertion version for nominal diameter DN 80 to 1500 (3 to 60″)
  • Medium temperature up to +130 °C (266 °F)
  • High accuracy: ±1.5 % o.r. (10 to 100 % o.f.s.)
  • Device as compact or remote version
  • 4-20 mA HART, PROFIBUS PA/DP, Modbus RS485, FF
  • Worldwide approvals (Hazardous areas)
T-mass
Diameter DN 80 to 1500 (3 to 60″)
Wetted Materials Transducer: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
Insertion tube: 1.4404 (316/316L); Alloy C22, 2.4602 (on request)
Transducer guard: 1.4404 (316L)
Compression fitting: 1.4404 (316/316L)
Ferrules: PEEK 450G, PVDF
Bonded seals: EPDM, Kalrez 6375, Nitrile and 316/316L
Accuracy Gas: 1.5% o.r. (10 to 100% o.f.s.), 0.15% o.f.s. (1 to 10% o.f.s.)
Maximum Process Pressure -0.5 to 20 bar gauge (-7.25 to 290 psi gauge)
Degree of Protection IP67 (NEMA 4X) for transmitter and sensor
Display Liquid crystal: back-lit, two lines with 16 characters per line
Outputs 4-20mA HART (active/passive selectable), pulse, frequency, status
Profibus DP, Profibus PA, Foundation Fieldbus, Modbus
Inputs 4-20mA, status input
Power Supply 85 to 260 VAC, 45 to 65 Hz
20 to 55 VAC, 45 to 65 Hz
16 to 62 VDC

Endress & Hauser t-mass 65I is insertion type Thermal mass flow meter designed for the direct mass flow measurement for industrial gases and compressed air. The turndown ratio of typically 100:1, it can measure accurately operational flow rates and offline leakage. The integrated gas engine allows you to configure the device for 20 freely selectable gases also the insertion version is suitable for large pipelines or rectangular ventilation ducts.

Datasheet: Proline t-mass 65F, 65I

Scroll to Top
×