Last Updates: 25/08/2020
Brands:Baumer

Baumer FlexTop 2211 Temperature Transmitter

Part Number: FlexTop 2211 Categories: ,
  • Email Us: sales@celectric.com.my
  • WhatsApp Us: +60165519084
  • Baumer FlexTop 2211 is a 4 to 20 mA loop-powered and configurable universal transmitter with galvanic isolation between input and output. The input can be configured for RTD or T/C sensors, resistance, current or voltage signals.
    For RTD input, either 2-, 3- or 4-wire connection can be selected for the resistance input. While when thermocouples connected the built-in temperature sensor or a remote Pt100 sensor can be used to compensate for “cold junction” (CJC).
    FlexTop 2211 is embedded in silicone which makes it resistant to humid environments.
    The configuration can be established from the dedicated FlexProgrammer configuring tool connected to a PC.
    FlexTop 2211 has a 6 mm centre hole for fast sensor replacement and spring-loaded mounting screws which ensure a safe fastening even in vibrating environments.

    • For RTD (resistance) or T/C (thermocouple)
    • Input: RTD, T/C, mV and ohm
    • Measuring range -270 … +2300 °C
    • More accurate than 0.1 °C for Pt100
    • ATEX explosion protection
    • DIN form B housing installation

    Technical Data

    Ambient conditions
    Degree of protection (EN 60529)
    • IP 10 , terminals
    • IP 55 , housing
    Humidity
    • < 98 % RH , condensing
    Long-term test (transmitter)
    • IEC 770 6.3.2
    Vibration (sinusoidal) (EN 60068-2-6)
    • 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
    Output signal
    Damping
    • 0.0 … 30 s , programmable
    Characteristic
    • Linear or customised with max. 30 points
    Output signal
    • 4 … 20 mA , 2-wire
    • 20 … 4 mA , 2-wire
    Accuracy
    • < 0.1 % FSR
    Response time, T90
    • ≤ 1.0 s , with Pt100
    • ≤ 1.6 s , with T/C
    Temperature drift
    • < 0.003 %/K , typ.
    • < 0.01 %/K , max.
    Load resistance
    • R = (U – 6.5 V)/23 mA
    Resolution
    • 12 bit
    Up/Down scaling limits
    • 23 mA / 3.5 mA
    Ripple immunity
    • 3 Vrms
    Power-up time
    • 1.8 … 3.9 s
    Power supply
    • 6.5 … 30 V DC
    Compliance and approvals
    EMC
    • EN 61326-1
    Namur
    • NE21
    Explosion protection
    • ATEX II 1G Ex ia IIC T5/T6
    • ATEX II 3G Ex nA IIC T5

    Datasheet: Baumer_Flextop2211 Datasheet
    Instruction Manual: Baumer_Flextop2211-Instruction Manual

    Scroll to Top
    ×