Signal Isolators / Conditioners
Showing 1–24 of 28 results
Adtek NT-TR RTD Converter & Isolator
Request a Quote● Measuring Pt100Ω – 3 wired
● 4 Input and 6 Popular Output Ranges Programmable by Dip-Switch
● Input type Changeable by difference Input Modules
● Dual difference signal output available
● Low cost and high stability
● CE Approved
Adtek MT-VI AC/DC Signal Converter & Isolator
Request a Quote● 6 Popular Input and Output Ranges Programmable by dip switches
● Changeable Input Module Between V/mA , Potentiometer, Strain Gauge, easy maintain and save stock
● Dual difference signal output available
Adtek ST-LC Signal Converter
Request a Quote● Measuring 2 channels 0~10V / 0(4)~20mA or 0~10.0mV/~100.0mV and single display screen with Mathematic function Addition / Subtraction / Multiplication / Division / high or low selector
● Isolated between input 1, input 2, output and power
● Plug-in conditioner with display and operating key
● Accuracy: ± 0.04%, Display range: -19999~99999
● 1 Analogue output, 1 RS485 port and 1 Relay output available for multi-cross selection 2 outputs at most.
Adtek MT-DA Programmable Signal Converter
Request a Quote- 4 Popular Input Ranges Programmable in One
- Modular Design, Easy Maintain and Save Stock;
- Dual trip relay output available
- Low cost and high stability
Adtek SD-CL Signal Converter
Request a Quote● Input signal for 4~20mA(with excitation supply)
● Output 4~20mA wire mode with loop powered,
● DIN rail mounting with Ultra slim in 7.6 mm profile
● CE Approved & RoHS
Adtek ST-SG Strain Gauge Signal Converter
Request a Quote● Measuring Stain Gauge signal range 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify
● Accuracy: ± 0.04%; Display range: -19999~29999
● User function, easily programmable via the top panel
● Calibration with Strain Gauge in the field capability
● 1 Analogue output, 1 RS 485 port, 3 Relay output and Excitation supply available for multi-cross selection in 4 outputs
● CE Approved
Adtek AT Series Signal Converter
Request a Quote● Output for 0~5V / 0~10V / 1~5V / 2~10V / 4~20mA / 0~20mA changeable by dip switches and terminals
● Dual different signals output available
● LED indications for power, input and output status
● 0.1% accuracy available in option
● 17.5 mm thin profile and 35mm DIN rail mounting
● CE Approved & RoHS
Adtek TT Head Mount Temperature Transmitter
Request a Quote● Accuracy: T/C: 0.3% Pt100Ω: 0.15%
● Wide selection of input with difference sensor type & range
● Dimension small
● Low output ripple
● High stability & low cost
Adtek NT-RS Resistance Converter & Isolator
Request a Quote● Measures 2 Wire Resistances 0 ~ 100KΩ
● 4 two wire Resistance Range Programmable
● Dual difference output available with 6 Popular Output Ranges Programmable by dip switches
● Plug into 11 pin DIN rail mounted base
● Low cost and high stability
● CE Approved
Yokogawa MH7D Dual Outputs Signal Isolator
Plug-in type Dual Outputs Signal Isolator
Model: MH7D-AAA-5
MH7D – Model: MH7D, dual output signal isolator
-A – Input Signal: 4 to 20mA
A – Output-1 Signal: 4 to 20mA
A – Output-2 Signal: 4 to 20mA
-5 – Power supply: 170-264 V AC$536$456
Adtek MT-CL Programmable Signal Converter
Request a Quote- 6 Popular Input and Output Ranges Programmable by dip switches
- Changeable Input Module Between V/mA , Potentiometer, Strain Gauge, easy maintain and save stock
- Dual difference signal output available
Adtek ST-RL Frequency Converter
Request a Quote●Measuring Frequency AUTO RANGE 0.01Hz~100KHz / ~140KHz(optional) / Contact, NPN, PNP, Voltage pulse, Sine wave 30~600Vp
● Accuracy: ± 0.005%; Display range: 0~99999
● Decimal Point auto moving according to input frequency
● User function, easily programmable via the top panel
● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most
● CE Approved
Adtek SD-PR Signal Converter
Request a Quote● Input signal for 4~20mA(with excitation supply available)
● Output 4~20mA with loop powered, self powered or auxiliary powered available
● DIN rail mounting with Ultra slim in 7.6 mm profile
● CE Approved & RoHS
Adtek MT-RT Potentiometer Signal Converter
Request a Quote● Measures 3 Wire Potentiometers and 2 Wire resistances
● 2 Pot Ranges and 4 two wire Resistance Range Programmable
● 6 Popular Output Ranges Programmable by dip switches
● Low cost and high stability
Adtek ST-PR Signal Converter
Request a Quote● Measuring linear signal 0~10V / 0(4)~20mA in one controller
● Accuracy: ± 0.04%; 4 1/2 Digital display: -19999~29999
● User function, Easily programmable via the front panel
● 1 Analogue output, 1 RS 485 port, 3 Relay and Excitation Supply output available for multi-cross selection in 3 outputs
● CE Approved
Adtek ST-VA Voltage Current Converter
Request a Quote● Measuring Voltage or Current for DC / AC / TRMS
● Accuracy: ± 0.04% or ± 0.1%; Display range: -19999~29999
● User function, easily programmable via the top panel
● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection in 3 outputs
● Design by CE standard
Adtek SD-T Programmable Temperature Transmitter
Request a Quote● Input Type and range programmable for RTD Pt100Ω; Thermo-couple type K, J, E, T, R, S, B
● Output 4~20mA with loop powered or auxiliary powered available
● DIN rail mounting with Ultra slim in 7.6 mm profile
● CE Approved & RoHS
Adtek ST-T Temperature Converter
Request a Quote●Measuring RTD: Pt100Ω; Thermocouple: K, J, E, T, R, S, B/ Multiplication / Division / high or low selector
● Accuracy: RTD: ± 0.1%; Thermocouple: ± 0.2%
● User function, easily programmable via the top panel
● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at mos
● CE Approved
Adtek ST-RS Resistance Signal Converter
Request a Quote● Measuring resistance from 0~200Ω/2000Ω/20.0KΩ/200.0KΩ(2 Wire)
● Accuracy: ± 0.04%; Display range: -19999~29999
● User function, Easily programmable via the front panel
● Field calibration with resistance to meet the system requirement
● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.
●CE Approved
Adtek NT-TC Thermocouple Converter & Isolator
Request a Quote● Measuring Thermocouple K, J, E, T, T, S…
● 6 Popular Output Ranges Programmable by dip switches
● Dual difference signal output available
● Low cost and high stability
● CE Approved
Adtek MT-FF Programmable Signal Converter
Request a Quote● 8 Outputs Range Programmable by dip switches
● Modular Design, Easy Maintain and Save Stock;
● Dual pulse output available
Adtek NT-VA DC Signal Converter & Distributor
Request a Quote● Measuring DC current: 0~20mA / 5A, DC voltage: 0~50mV / 600V
● 6 Popular Input and Output Ranges Programmable by Dip-Switch
● Input type Changeable by difference Input Modules
● Dual difference signal output available(Isolated)
● Low cost and high stability
● CE Approved
Adtek ST-PM Potentiometer Converter
Request a Quote● Measuring potentiometer from 0~50Ω/~2.0KΩ; 0~2.0KΩ/~100.0KΩ (3 wire)
● Accuracy: ± 0.04%; Display range: -19999~29999
●User function, Easily programmable via the front panel
● Field calibration with potentiometer to meet the system requirement
● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.
●CE Approved
